SJCAM SJ4000 Firmware Download

SJCAM SJ4000 Drivers Download. As on all action waterproof cams, you will first take it out of the box. A simple press on the black clip of the top and everything unlocks. The joints are of quality and inspire confidence. Once the camera is out, we insert the battery (about 80min of autonomy) and it remains only to charge. An electrical outlet, the USB cable and go for a good hour before reaching 100%. A light on the screen indicates the progress of the load. All you need is a micro SD card and we recommend you not skimp on the quality at this level. For example the SanDisk 8Go in Class 10 is the best.

SJCAM SJ4000 Firmware Update

On an 8GB card you can put 60min of video in 1080p and as it will charge the battery every hour I advise you to multiply the cards in 8GB rather than a single big 16 or 32GB. For security, we will format using the SJ4000 . The opportunity to approach menus and navigation via the touch screen.

LCD screen
The menus and settings of the SJ4000 are very intuitive and well localized in French. The touch LCD responds well even with big fingers and logic menus seem even more intuitive than at GoPro . Even if the screen is low definition, it will allow you to frame your plans even in direct sunlight. Playing recorded videos provides comfort and security to check your shots. All the classic shooting modes are available: video, photo and timelapse but you also have a fairly new mode that allows you to use the SJ4000 as a  dashcam.

Read Also:  Download Driver Lexmark X4975ve

Action Cam Firmware SJCAM SJ4000 Download

Dashcam mode  is the ability to shoot continuously, especially for the car, with information (date and time) printed on the video. Still little used in Europe, this mode is very popular in Russia and China to serve as video evidence of his conduct in case of accident.

In this mode the camera connected to a cigarette lighter will start at the same time as the car and will film continuously. If the capacity of the card reaches saturation, no worries loop rewritten on the oldest files and so on.

Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE.
To upgrade the firmware properly, follow the steps carefully:
1. Power the camera off.
2. Remove the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format on your computer*.
4. Copy the firmware \’bin\’ file into the root directory of your MicroSD card, please keep the firmware \’bin\’ file\’s name.
5. Reinsert the SD card to your camera.
6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7. After the firmware update was completed, please delete the \’bin\’ file.
*We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.


Read Also:  Download Driver TP-LINK TL-WN722N USB Wireless Adapter

Leave a comment