SJCAM M20 Firmware Download

SJCAM M20 Drivers Download. At 1080p resolution with 60fps I lower the sharpness expected due to the sensor used. Several cameras with Sony IMX206 passed through my hands and there was worse. However, it will be seen that it will not be as much a sensor as the lens and the video is more sharp than most competitors with the same hardware.

Even so, I can imagine more sharpness of detail and you can also notice the noise in the video. All of this should be caused by firmware on the camera and fixed with some further updates.

The SJCAM M20 has a slightly worse dynamic range in the video than the SJ5000X Elite, mainly sunlight, but can not be objected to within the camera’s price, in this case I recommend playing with camera settings (white balance and exposure). What is important for the action camera is to master the fast movement, but SJCAM cameras have never been a problem (mainly because of the Novatek processor, which belongs to that point of view) and the problem is not even with the M20. The 1080p video stream with 60fps is 30Mbps.

SJCAM M20 Firmware Update

Camera uploads videos to either mov or mp4 format, depending on what you choose in the camera menu. Our test videos were downloaded in mp4 and you can download them without lowering the quality of YouTube: 1080p_60fps, 2K_30fps, 4K_24fps The SJCAM M20 action camera is in the Czech official distribution of 3990Kč (for more information  here ) and you are buying a very decent camera with stabilization using gyroscope, 2K video and 1080p resolution with 60fps. In addition, the remote control shifts the camera in a different direction and makes it easy to work with the camera.

Read Also:  Download Firmware Dell Emerson 750W Power Source

It again fades the poor quality of the recorded sound, as well as some errors in the current firmware version (1.2.4). Fortunately, at least firmware can be repaired and SJCAM has grown accustomed to the fact that it really takes care of its cameras in this case.

Download SJCAM M20 Firmware
Note: Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE:
To upgrade the firmware properly, follow the steps carefully:
1. Power off the camera.
2. Remove the MicroSD card from the camera.
3. Format the MicroSD card using the FAT32 file format on your computer*.
4. Copy the firmware \’bin\’ file into the memory card, please keep the firmware \’bin\’ file\’s name.
5. Reinsert the SD card to your camera.
6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7. After the firmware update was completed, please delete the \’bin\’ file.
-We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

Leave a comment