TP-Link TL-WA860RE Firmware Download. I bought this repeater because we had in the bedroom very weak WLAN until at all no reception. I had only thought about whether I buy the sockets extension from Devolo but what was over 100 € was very expensive for our purpose.
TP-Link TL-WA860RE Repeater Firmware Download
So I bought this one here. The decor is child-friendly, extender into the socket and wait a few minutes until it has started up. Press the WPS key and it flashes. Go to the router and also press the WPS button, wait a minute and that is it. For the ones who have no WPS button on the router, you have to connect the ding briefly with the cable and set up on the laptop. Nice, I think the TP-Link TL-WA860RE repeater also supports 5 GHZ WLAN, but should be said that the normal 2.4 GHz has a higher range, (Technically).
TP-Link TL-WA860RE Firmware Update
Download Repeater Firmware TP-Link TL-WA860RE
All in all I am super-satisfied for the price. Now we also in the bedroom super Wlan to stream some music or audio books. The TP-Link TL-WA860RE transmission power is really great, both the 2.4 and 5 GHz mode, the configuration was fine (although not as easy as in Fritz Repeater 310), but this is in transmitting and receiving a Tick Better and finally covers the entire apartment (220m2). I use the good piece as connection from the Entertain receiver to the router, because me the Telekom Bridges are too expensive, large and cumbersome.
Download Firmware Repeater TP-Link TL-WA860RE
This is theoretically quite simple, which also applies to the little brother WA 850RE, which I also have in use. If one is a working connection, one can connect the TP link with a simple push on the repeater and the router (WPS / WLAN logging etc.) quite simply. Everyone can do this in 2 minutes. For use as a wireless bridge on Entertain receivers and HD channels I advise if image quality to the following \”trick\”:
1. If necessary activate the SP 724v menu 5Ghz Wi-Fi and set on n / 300MBit / s – with the AC-setting I received no connection.
2. On the repeater in the menu set that the connection to the router to 5Ghz is to take place and the repeater on 2,4Ghz WLAN connection.
3. If it does not need to be a repeater at the same time and it is sufficient for the receiver, change the 2.4Ghz SSID (network name) to a different name. The advantage: devices recognize in the repeater their own WLAN and connect directly to the router. The repeater must therefore only the data of the media receiver over the WLAN scoop and does that on the tendential \”better\” 5Ghz band. If you need the repeater as such, you can register via the 2nd SSID at any time. I find the part super, just for the price. If you have any questions, please feel free to contact me.
Download User Manual TP-Link TL-WA860RE
Download Firmware TP-Link TL-WA860RE Version 1
Download Firmware TP-Link TL-WA860RE Version 2
If the download link does not work, please CLICK HERE to download firmware TP-Link TL-WA860RE from TP-LINK official source.