Download Firmware Netgear Nighthawk R6700

Netgear Nighthawk R6700 Software & Firmware Download. I decided on this Netgear Nighthawk R6700 because I need an access point with a good WiFi signal in my network, as well as a gigabit port switch for a couple of permanently connected LAN devices. The device works very solidly and stably for this purpose. The 2.4 GHz signal sends very strong signals to the last corner of the house, and there are no more interruptions when streaming with simultaneous use of Bluetooth and my previous device often had dropouts. As expected, the 5 GHz signal transmits much weaker, but still at a high level, so here too an improvement.

Netgear Nighthawk R6700 Software & Firmware

I didn\’t like the Netgear app for setting up; here, completely unnecessarily, an account at Netgear with all possible personal information must be set up. It is better to do it normally via the browser after entering the router address. In any case, I got along better with it, but the app is quite useful for beginners once you\’ve battled your way through creating an account.

Netgear Nighthawk R6700 handles a 100mb WAN connection without issue. WiFi works great, although a month ago I had a scare when it looked like the 5MHz transciever died. No signal at all while 2.4 MHz present (tested). But, it came back after HW reset. All around, I\’m very happy with this solution.

So I already have 3 of these routers in use in our house. The signal power is sufficient for one floor. If there are several floors, it is better to have one router per floor. The Netgear Nighthawk R6700 speed is top and there is nothing wrong with the stability. The router runs trouble-free for months and actually never has to be restarted – in contrast to some competing products. I am absolutely satisfied.

Read Also:  Download Firmware Veho Muvi K2 4K & Review

I\’m not an expert on what is concerned or anything. Netgear Nighthawk R6700 router was bought to serve as a repeater on the first floor. But also to have your own WiFi network with your own password and co. It was delivered, unpacked, plugged in according to instructions and pictures from the Internet. The assword etc. everything would be entered on the Netgear \”Browser\” installation page and Zack after almost 30 minutes it was done.

Netgear Nighthawk R6700 Support (Download, Software, Firmware)

Download Netgear Nighthawk R6700 Documentation

Download Netgear Nighthawk R6700 Firmware & Software

  • Firmware Version 1.0.2.16 – File size: 30.2 MB Download
  • NETGEAR Genie App (Mac) Download
  • NETGEAR Genie App (Windows) Download
  • ReadySHARE Printer Utility Version 1.36 (Windows) Download
  • ReadySHARE Printer Utility Version 3.1 (Mac – Supports MAC OS 10.13 and above) Download
  • ReadySHARE Vault Software Utility Version 2.0.10.100 Download

Leave a comment