Brother MFC-L2701D Driver Download. The Brother MFC-L2701D printer comes well packaged in a relatively large carton. Commissioning has been easy. There is a guide on how to use the toner, but you can not go wrong.
Brother MFC-L2701D Drivers Download
For use over the network, software must be installed on the computer, which can be found on an enclosed CD. A \”1-Click\” installation is possible, which installs a status monitor and a control panel.
This can do everything you can imagine. The Brother MFC-L2701D software I find (compared to the Samsung software) very good. It is clear and easy to use.
The functions and settings (!) It can all be used or set via the printer and via the software on the PC. You can set (see picture) four \”profiles\” that can be accessed by clicking (eg jpeg, normal PDF, searchable PDF). If you click on the profile, you can fine tune again.
Brother MFC-L2701D Printer Driver Download
The scanning works well, I am particularly impressed with the ADF. The only drawback is that you are very careful how to load the sheets, as there is no guidance and you can very easily insert the sheets wrong, which leads you to oblique scans.
So pay attention to really grades, which is not easy. The Brother MFC-L2701D scan speed is good with ADF. It takes 6 seconds from the software click to the start of the actual scan. For 35 sheets (maximum capacity of the ADF) the scanner needs 1:42 minutes at 300dpi.
It takes 2 seconds to process as a normal pdf, but it takes 25 seconds to process 35 normal text pages. The OCR accuracy is very good, I could not find any mistakes while looking through.
Brother MFC-L2701D Software & Drivers Download
The size of the PDF is 4 MB for the normal PDF nud (amazingly) at 1, the scan area does not go all the way to the edge of an A4 sheet. Meaning, who hangs A4 and sets in the software A4 has a 1-2 mm wide edge, which is not scanned from the side. I like the print image.
The speed is from the stand-by 3 seconds from clicking in Word until the printer starts, 8 seconds until it starts printing and also 8 seconds until the sheet has completely come out. The copy of the same sheet lasts 18 seconds from the operation of the copier button until the sheet is completely out of the printer.
Subjectively, printing is very fast. The offset for duplex printing is just over 1mm. The printing of envelopes and labels can be done with the rear opening for direct passage and a manual paper feed.
The manual paper feed works well from the stand-by, which was different with my Samsung. Here you can create the medium, the printer wakes up and then picks up. Completely problem-free.
My A4 label sheets are very light, but it is hardly noticeable. Envelopes with a privacy window are not printable, these waves are strong, normal envelopes waves easily.
The Brother MFC-L2701D printer has a special manual mode for envelopes, you have to move two levers on the back of the unit under a flap. Subjectively, in envelopes this easily improves how \”taken\” the envelope becomes by pressure.
Overall, I\’m very happy with this Brother MFC-L2701D printer. How he strikes in the long-term test, of course, I have to find out. I would recommend him, especially for the current price (about 140 €).
BROTHER MFC-L2701D DRIVERS – Click the link:
- Full Driver & Software Package Brother MFC-L2701D for OS X (10.11), OS X (10.10), OS X (10.9), OS X (10.8), Mac OS X (10.7)
- Full Driver & Software Package Brother MFC-L2701D for macOS (10.13), macOS (10.12)
- Full Driver & Software Package Brother MFC-L2701D for Windows 10 (32-bit), Windows 10 (64-bit), Windows 8.1 (32-bit), Windows 8.1 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 7 (32-bit), Windows 7 (64-bit), Windows Vista (32-bit), Windows Vista (64-bit), Windows XP (32-bit), Windows XP (64-bit)